Latest News Archive

Please select Category, Year, and then Month to display items
Previous Archive
31 January 2019 | Story Leonie Bolleurs | Photo Earl Slipher
Mars
One of the first colour photographs of Mars, taken through the lens of the Lamont-Hussey telescope in 1939. The telescope was restored and is currently on display at the Naval Hill Planetarium.

In 2018 the University of the Free State (UFS) launched the historic 27-inch Lamont-Hussey Refractor telescope exhibit together with the completed observation platform and a garden in front of the Naval Hill Planetarium in Bloemfontein.

The re-installation of the telescope as a static outdoor exhibition at Naval Hill is now complete. The project started several years ago after the recovery of abandoned parts of the old telescope. What followed was a story of trial, patience, careful planning and a lot of hard work.

 

Taking it apart

According to Dawid van Jaarsveld from the UFS Department of Physics, the mounting and tube of the Lamont telescope has returned to its home, the Lamont-Hussey Observatory, for display. The telescope had 47 years of service and years of abandonment in the veld after it was taken apart in 1975.

Its former telescope dome now hosts the Naval Hill Planetarium, the first digital planetarium in Sub-Saharan Africa.

The telescope was taken apart after the observatory was closed in 1974. It was dismantled and the optics were sent back to the University of Michigan with the largest pieces “left for dead in the veld” on the grounds of the Ehrlichpark Fire Station.

According to Dr Hendrik van Heerden from the UFS Department of Physics, who assisted in the technical side of re-installing the telescope, the larger pieces were recovered by Braam van Zyl and subsequently moved into the museum hanger of the Bloemfontein Fire Brigade where they stayed for many years.

 

Contribution to science

The University of Michigan in the US built the Lamont-Hussey Observatory between 1926 and 1928 in Bloemfontein for the study of double stars. The telescope had great historic significance and was used by professional astronomer RA Rossiter from Michigan, who set the record for discovering and measuring more than 5 000 double stars. The planetarium also measured the most double stars in the world, more than 7 000.

Van Jaarsveld describes a double star – also known as a binary star system – as two stars orbiting around one another. Studies of double stars enable researchers to determine the mass of stars.

Earl Slipher used the telescope to take one of the very first colour photographs of Mars in 1939. Slipher took 60 000 photos of Mars in 1939, 1954 and 1956 with the telescope. He was the world expert on the planet at the time. The camera Slipher used is displayed in the Boyden Observatory museum just outside Bloemfontein.

 

Putting it together

Van Heerden continues: “In early 2017 the components [of the telescope] were relocated to Dukoc Manufacturing in Bloemfontein for cleaning, treatment and painting. It took a while, as the missing components had to be manufactured before the final painting could be completed. The missing pieces were made with the help of the original blueprints of the telescope, provided by Prof Patrick Seitzer of the University of Michigan.

“These blueprints, along with measurements taken from the cleaned parts at Dukoc Manufacturing were used by Barend Crous, UFS Head of Instrumentation, to develop and manufacture the missing parts. These include the polar axis (solid steel axle over 3 m long and weighing more than one ton), axis-bearing caps (cast-iron pieces weighing more than 100 kg and 200 kg respectively) and telescope position wheels and gear works. After the required components were manufactured and refurbished, they were relocated to the Naval Hill Planetarium for the launch ceremony which was held on 5 June 2018.

“Planning of the installation of the telescope thereafter started in earnest. The jigsaw had to be put together again. The sheer size of the parts required some heavy equipment during the installation. With hard work, good coordination and a bit of luck, a team consisting of myself as project coordinator and consultant, Barend Crous, site engineer; Innes Basson, supervisor; Denver de Koker, handyman; and Wikus Storm, welder, got the job done,” Dr Van Heerden said.

 

Information sessions

Astronomy enthusiasts, tourists, school groups and other members of the public can now visit the Lamont-Hussey telescope with it finally back home after many years of neglect and abandonment in the veld. It can again hold itself high, looking at the stars.

The official opening of the telescope will take place on 26 April 2019 and Prof Seitzer from the University of Michigan will attend the opening event.

The refurbishment of the old telescope and the establishment of the new garden and observing platform were made possible by a R1 million donation by ArcelorMittal.

News Archive

NRF grants of millions for Kovsie professors
2013-05-20

 

Prof Martin Ntwaeaborwa (left) and Prof Bennie Viljoen
20 May 2013


Two professors received research grants from the National Research Foundation (NRF). The money will be used for the purchase of equipment to add more value to their research and take the university further in specific research fields.

Prof Martin Ntwaeaborwa from the Department of Physics has received a R10 million award, following a successful application to the National Nanotechnology Equipment Programme (NNEP) of the NRF for a high-resolution field emission scanning electron microscope (SEM) with integrated cathodoluminescence (CL) and energy dispersive X-ray spectrometers (EDS).

Prof Bennie Viljoen from the Department of Microbial, Biochemical and Food Biotechnology has also been awarded R1,171 million, following a successful application to the Research Infrastructure Support Programme (RISP) for the purchase of a LECO CHN628 Series Elemental Analyser with a Sulphur add-on module.

Prof Ntwaeaborwa says the SEM-CL-EDS’ state-of-the art equipment combines three different techniques in one and it is capable of analysing a variety of materials ranging from bulk to individual nanoparticles. This combination is the first of its kind in Africa. This equipment is specifically designed for nanotechnology and can analyse particles as small as 5nm in diameter, a scale which the old tungsten SEM at the Centre of Microscopy cannot achieve.

The equipment will be used to simultaneously analyse the shapes and sizes of submicron particles, chemical composition and cathodoluminescence properties of materials. The SEM-CL-EDS is a multi-user facility and it will be used for multi- and interdisciplinary research involving physics, chemistry, materials science, life sciences and geological sciences. It will be housed at the Centre of Microscopy.
“I have no doubt that this equipment is going to give our university a great leap forward in research in the fields of electron microscopy and cathodoluminescence,” Prof Ntwaeaborwa said.

Prof Viljoen says the analyser is used to determine nitrogen, carbon/nitrogen, and carbon/hydrogen/nitrogen in organic matrices. The instrument utilises a combustion technique and provides a result within 4,5 minutes for all the elements being determined. In addition to the above, the machine also offers a sulphur add-on module which provides sulphur analysis for any element combination. The CHN 628 S module is specifically designed to determine the sulphur content in a wide variety of organic materials such as coal and fuel oils, as well as some inorganic materials such as soil, cement and limestone.

The necessity of environmental protection has stimulated the development of various methods, allowing the determination of different pollutants in the natural environment, including methods for determining inorganic nitrogen ions, carbon and sulphur. Many of the methods used so far have proven insufficiently sensitive, selective or inaccurate. The availability of the LECO analyser in a research programme on environmental pollution/ food security will facilitate accurate and rapid quantification of these elements. Ions in water, waste water, air, food products and other complex matrix samples have become a major problem and studies are showing that these pollutants are likely to cause severe declines in native plant communities and eventually food security.

“With the addition of the analyser, we will be able to identify these polluted areas, including air, water and land pollution, in an attempt to enhance food security,” Viljoen said. “Excess levels of nitrogen and phosphorous wreaking havoc on human health and food security, will be investigated.”

We use cookies to make interactions with our websites and services easy and meaningful. To better understand how they are used, read more about the UFS cookie policy. By continuing to use this site you are giving us your consent to do this.

Accept