Latest News Archive

Please select Category, Year, and then Month to display items
Previous Archive
03 February 2020 | Story Cobus van Jaarsveld | Photo Charl Devenish
Traffic Circle on the UFS Bloemfontein Campus
The Department of Protection Services shares how to #BSafe at traffic circles.

For the majority of drivers, one of the most confusing driving laws is the correct use of a traffic circle, especially in Bloemfontein with the large number of smaller traffic circles constructed over the past few years; also across the University of the Free State (UFS) Bloemfontein Campus.

“In fact, many motorists do not know that there is a difference between a larger traffic circle and a mini traffic circle, other than their size. Can you really be frustrated if someone cuts you off at a traffic circle if you don't know the rules? Arrive Alive has shed some light on the issue,” said Cobus van Jaarsveld, Assistant Director: Threat Detection, Investigations and Liaison in the UFS Department of Protection Services.

What is the difference between the two circles?

A traffic circle is classified as large when it has a minimum diameter of about 16 metres and a 1,5 to 2 metre flattened kerb, which allows heavy vehicles to drive onto a small section of the circle. A mini traffic circle is normally not more than seven to ten metres in diameter and the entire circle is mountable for heavy vehicles.

Are there different rules for each?

Yes – the rule of thumb is that mini traffic circles, which are usually found in residential areas, have the same rules as a four-way stop – first come first served. For larger traffic circles, which are usually found at busy crossings to assist with the traffic flow, you must give way to the right.

Rules to remember at a large traffic circle

As you arrive at a large traffic circle, traffic coming from your right has right of way, regardless of how many cars there are. Wait until there is a gap in the traffic and then ease slowly into the circle. Watch out for other traffic in the circle and be aware that they may not be using their indicators.

Use your indicators

Signal when you are going to turn – switch your indicator on immediately after passing the exit prior to the one you intend taking. If you are taking the first exit, i.e. you're turning left, then flick on your left indicator and keep in the outside/left-hand lane. Keeping in the outside/left-hand lane also works well if you're continuing straight ahead, as your exit is very close. After you've passed the left-turn exit and yours is next, signal left and you're free. If you're turning right or performing a U-turn, keep in the inside/right-hand lane. Only signal left and change into the left-hand lane once you've passed the other exits and only yours is ahead.

Rules to remember at a mini traffic circle

The first vehicle to cross the line has the right of way, so it really works on the same principle as a four-way stop or yield sign. Proceed in a clockwise direction around the circle, without driving on it.

News Archive

Future Leader’s Award 2017 goes to UFS Quantity Surveying student
2017-08-11

Description: Future Leader’s Award 2017 goes to UFS Quantity Surveying student Tags: Future Leader’s Award 2017 goes to UFS Quantity Surveying student 

Celebrating big achievements in the construction
sector at the recent Association of South African
Quantity Surveyors (ASAQS) conference are, from
the left: Cameron Ferreira, junior lecturer in the
UFS Department of Quantity Surveying,
Jhon Thatcher, former UFS student in the same
department who was the second runner-up for the
Gold Medal Award, Dr Stephan Ramabodu, President
of ASAQS, Gerné Bothma, former student in the
department and winner of the Future Leaders’
Award 2017, and Pierre Oosthuizen, UFS lecturer in
the same department.
Photos: Supplied


The Department of Quantity Surveying and Construction Management at the University of the Free State (UFS) made good on its promise to develop independent and critical-thinking graduates who will become leaders in their field. At the recent Association of South African Quantity Surveyors (ASAQS) conference and gala dinner, two students from the department, Gerné Botma and Jhon Thatcher, received awards for their outstanding performance.

Best of the best
Botma received the ASAQS Future Leaders’ Award (2017), an award based on academic achievement in the first three years of study. He competed with nominees from universities across South Africa offering Quantity Surveying programmes, and was the winner in this category.

Thatcher was a second runner-up for the ASAQS Gold Medal Award (being in the top three Quantity Surveying students in South Africa). This is awarded on a number of criteria, including academic achievement. Fourth-year students from all the universities in South Africa offering Quantity Surveying programmes compete for this award, and must display achievement in categories such as academia, leadership, community engagement, and general interests.  In 2016, the Gold Medal Award was won by the UFS student, Kamogelo Leeuw.

Keeping abreast of developments
Today, organisations are relying on its members to stay ahead of issues, technologies, innovations and trends. In Quantity Surveying, to keep abreast of developments in the built environment, ASAQS was established as a voluntary association, with one of its goals being advancing and promoting the science and practice of Quantity Surveying.  ASAQS works in close collaboration with its member firms, tertiary institutions, and the South African Council for Quantity Surveying Professions (SACQSP), a statutory body that oversees and regulates the profession, and accredit Quantity Surveying programmes in South Africa.

Two staff members from the UFS Department of Quantity Surveying and Construction Management, Cameron Ferreira and Pierre Oosthuizen, attended the recent ASAQS annual conference. Ferreira, a junior lecturer in the department, is the current Chapter Chairperson of the Free State for ASAQS and Oosthuizen, a lecturer in the department, is the former Chapter Chairperson.

According to Ferreira, they attended the conference to keep abreast of the latest development within the industry. “The event also served as a great networking opportunity for the UFS to build partnerships with other industry pioneers,” she said. Making use of opportunities such as these is in line with the UFS’s pursuit of lifelong learning.

We use cookies to make interactions with our websites and services easy and meaningful. To better understand how they are used, read more about the UFS cookie policy. By continuing to use this site you are giving us your consent to do this.

Accept