Latest News Archive

Please select Category, Year, and then Month to display items
Previous Archive
23 September 2020 | Story Leonie Bolleurs | Photo Supplied
Zama Sithole

Zama Sithole, a master’s student in Environmental Managementat the University of the Free State (UFS), would one day like to assist communal artisanal small-scale miners (ASM) to legalise their work. Although the ASMs are not involved in turf wars or criminality as in the case of zama-zamas, they are deemed illegal workers.

The prime mining legislation, the Mineral and Petroleum Resources Development Act, makes no provision for subsistence or communal ASM activities. Such miners are therefore considered illegal miners.

“ASM employs more than 20 million people globally and a country such as South Africa, with an unemployment rate of 30,1%, should assimilate this type of mining as a legal form of employment,” says Zama.

“Their only client base is the surrounding communities. Mining, besides government grants, is their only source of income.”

Zama aspires to assist the illegal miners to become legal and reap the benefits of skills and funding to increase their income.

“And guidance from the regulatory authorities will ensure that the communal ASM miners become more aware of environmental management,” she adds.

Zama recently presented her research, titled: Shortcomings of the South African Legislative Framework in Addressing Communal Artisanal Small-scale Mining: A Blaauwbosch Case Studyat the 2020 Environmental Law Association (ELA) Annual Student Conference.

She also received the award for Best Speaker at the conference.

In her research, Zama focuses on Blaauwbosch, a rural township area located south-east of Newcastle in northern KwaZulu-Natal, where subsistence coal and clay opencast mining by community members has been going on for more than four decades.

Environmental degradation

According to the Mineral and Petroleum Resources Development Act, mining is only deemed legal if there is a mining permit, mining right, production right or preferent mining right authorised by the Department of Mineral Resources. Since communal ASMs are unregulated, environmental degradation is rife.

According to her investigation, environmental hazards such as traces of acid mine drainage and poor air quality (due to spontaneous combustion), are localised in the area. This is a deterrent to the surrounding community that has minimal health and safety awareness.

Owing to the fact that communal ASM miners are not assimilated into the legislation, the competent authorities such as the Department of Mineral Resources and Energy and the Department of Water and Sanitation cannot offer mineral regulation and environmental guidance support.

Losing revenue

Zama says government is also losing revenue by not legalising this unique sector. She believes it is important to differentiate between communal ASMs and the ‘zama-zama’ type of mining.
 
She also found that according to the Mining and Minerals Policy (1998), “regulations in respect of mining should be relevant, understandable and affordable to the small-scale miner and should be enforced in a site-specific manner.” ... “Tax and royalty rates, levies, and financial guarantees for rehabilitation should not constrain the development of small-scale operations.”

“However, to date, this has not been realised,” Zama states.

Communal ASM miners thus cannot benefit from government-funded initiatives to upskill them in terms of mining and environmental management.

Making a difference

Zama plans to conduct more research to understand the dynamics of how other countries have legalised this sector and draw learnings from this to determine how it can be applied in the South African context.

“In our country, there is very limited data and hence understanding on communal ASM. This could be one of the reasons why the government cannot make an informed decision on how to legalise this sector,” she says.

News Archive

NRF grants of millions for Kovsie professors
2013-05-20

 

Prof Martin Ntwaeaborwa (left) and Prof Bennie Viljoen
20 May 2013


Two professors received research grants from the National Research Foundation (NRF). The money will be used for the purchase of equipment to add more value to their research and take the university further in specific research fields.

Prof Martin Ntwaeaborwa from the Department of Physics has received a R10 million award, following a successful application to the National Nanotechnology Equipment Programme (NNEP) of the NRF for a high-resolution field emission scanning electron microscope (SEM) with integrated cathodoluminescence (CL) and energy dispersive X-ray spectrometers (EDS).

Prof Bennie Viljoen from the Department of Microbial, Biochemical and Food Biotechnology has also been awarded R1,171 million, following a successful application to the Research Infrastructure Support Programme (RISP) for the purchase of a LECO CHN628 Series Elemental Analyser with a Sulphur add-on module.

Prof Ntwaeaborwa says the SEM-CL-EDS’ state-of-the art equipment combines three different techniques in one and it is capable of analysing a variety of materials ranging from bulk to individual nanoparticles. This combination is the first of its kind in Africa. This equipment is specifically designed for nanotechnology and can analyse particles as small as 5nm in diameter, a scale which the old tungsten SEM at the Centre of Microscopy cannot achieve.

The equipment will be used to simultaneously analyse the shapes and sizes of submicron particles, chemical composition and cathodoluminescence properties of materials. The SEM-CL-EDS is a multi-user facility and it will be used for multi- and interdisciplinary research involving physics, chemistry, materials science, life sciences and geological sciences. It will be housed at the Centre of Microscopy.
“I have no doubt that this equipment is going to give our university a great leap forward in research in the fields of electron microscopy and cathodoluminescence,” Prof Ntwaeaborwa said.

Prof Viljoen says the analyser is used to determine nitrogen, carbon/nitrogen, and carbon/hydrogen/nitrogen in organic matrices. The instrument utilises a combustion technique and provides a result within 4,5 minutes for all the elements being determined. In addition to the above, the machine also offers a sulphur add-on module which provides sulphur analysis for any element combination. The CHN 628 S module is specifically designed to determine the sulphur content in a wide variety of organic materials such as coal and fuel oils, as well as some inorganic materials such as soil, cement and limestone.

The necessity of environmental protection has stimulated the development of various methods, allowing the determination of different pollutants in the natural environment, including methods for determining inorganic nitrogen ions, carbon and sulphur. Many of the methods used so far have proven insufficiently sensitive, selective or inaccurate. The availability of the LECO analyser in a research programme on environmental pollution/ food security will facilitate accurate and rapid quantification of these elements. Ions in water, waste water, air, food products and other complex matrix samples have become a major problem and studies are showing that these pollutants are likely to cause severe declines in native plant communities and eventually food security.

“With the addition of the analyser, we will be able to identify these polluted areas, including air, water and land pollution, in an attempt to enhance food security,” Viljoen said. “Excess levels of nitrogen and phosphorous wreaking havoc on human health and food security, will be investigated.”

We use cookies to make interactions with our websites and services easy and meaningful. To better understand how they are used, read more about the UFS cookie policy. By continuing to use this site you are giving us your consent to do this.

Accept