Latest News Archive

Please select Category, Year, and then Month to display items
Previous Archive
18 March 2021 | Story Leonie Bolleurs | Photo Elfrieda Lotter
From the Centre for Microscopy are, from the left: Edward Lee, Prof Koos Terblans, Hanlie Grobler, and Nonkululeko Phili-Mgobhozi.

In its quest to inspire excellence, the University of the Free State (UFS) is in the process of installing state-of-the-art microscopy instruments that will differentiate them as leaders in materials research.

This project to the value of R65 million will not only promote research in, among others, the fields of Chemistry, Physics, Microbiology, Geology, Plant Sciences, Zoology, and Cardiothoracic Surgery, but it will also increase the number of research articles published. 

Prof Koos Terblans, Head of the Department of Physics and Director of the Centre for Microscopy at the UFS, indicates that the university recently purchased a high-resolution transmission electron microscope (HRTEM), a scanning electron microscope (SEM), and a focused ion beam secondary electron microscope. 

“The installation of the equipment that was delivered on 1 March 2021 will take approximately three to six months,” he says. 

Research at another level

The biggest instrument, the HRTEM, allows for direct imaging of the atomic structure of samples. This powerful tool will allow researchers to study the properties of materials on an atomic scale. It will, for instance, be used to study nanoparticles, semiconductors, metals, and biological material.

The instrument will also be used to optimise heat treatment of materials, as it can heat the sample up to 1000 °C while recording live images of the sample. “With this apparatus, the UFS is the only institution in South Africa that can perform this function,” says Prof Terblans. 

He says to install the apparatus, they had to dig a hole of 2 m deep in a special room where the machine was to stand. The machine was then mounted on a solid concrete block (4 m x 3 m x 2 m) in order to minimise vibration. The instrument also acquired a special air conditioner that minimises the movement of air in the room. 

The focused ion-beam secondary electron microscope that was purchased, is used together with the HRTEM, explains Prof Terblans. It is used to cut out samples on a microscopic level to place inside the HRTEM. 

Having access to both the HRTEM and the ion-beam secondary electron microscope places the UFS at another level with its research, says Prof Terblans. 

At the forefront of microscopy 

The third machine acquired, the SEM – which is an electron microscope – allows researchers to produce images of a sample by scanning the surface of the sample with a focused beam of electrons. Prof Terblans says this machine will be used to serve researchers in the biology field with high-resolution SEM photos. 

The UFS Centre for Microscopy can, besides UFS researchers, be accessed by researchers from the Central University of Technology, the national museum, and other research facilities. 

With this injection of state-of-the-art equipment, the UFS is now more than ever at the forefront of research in South Africa. 

News Archive

Four modernised controlled environment cabinets inaugurated
2006-07-27

Photographed in a controlled environment cabinet were at the back from the left:  Mr Adriaan Hugo (head of the UFS Electronics and Mechanisation Division), Prof Herman van Schalkwyk (Dean: Faculty of Natural and Agricultural Sciences at the UFS) and Prof Koos Terblans (lecturer at the UFS Department of Physics).  In front is Mr Koos Uys (engineering consultant from Experto Designa who helped with the cooling systems of the cabinets).
Photo: Leonie Bolleurs

Different look for research in controlled circumstances at the UFS  

Research in controlled circumstances at the University of the Free State (UFS) turned a new page today with the inauguration of four modernised controlled environment cabinets of the Department of Soil, Crop and Climate Sciences.

“The controlled environment cabinets, which are situated next to the glass houses on the eastern side of the Agriculture Building on the Main Campus in Bloemfontein, were installed in the early 1980’s.  The cabinets, used for research purposes in controlled circumstances by the UFS for many years, became dysfunctional and needed to be repaired and put into use again,” said Prof Herman van Schalkwyk, Dean: Faculty of Natural and Agricultural Sciences at the UFS.

“The cabinets are used by the agronomics, horticulture and soil science divisions of the Department of Soil, Crop and Climate Sciences to control factors such as the temperature, the intensity and quality of light, synthesis and humidity.  This is done 24 hours a day, with hourly intervals,” said Prof Van Schalkwyk.

The cabinets are ideally suited to determine the joint and separate effects of these factors on the growth of plants.  The adaptability of plants to climate can also be investigated under controlled circumstances.  All of this leads to a better understanding of the growth and development process of plants, more specifically that of agricultural crops. 

“The effect of these environmental factors on the effectiveness of insect killers such as fungus killers, insecticide and weed killers can also be investigated and can help to explain the damage that is sometimes experienced, or even prevent the damage if the research is timeously,” said Prof Van Schalkwyk.

A new cabinet can cost between R2-3 million, depending on the degree of sophistication.  “Although controlled environment cabinets have been used for agricultural research for a long time, it has become costly to maintain them     and even more impossible to purchase new ones,” said Prof Van Schalkwyk.

According to Prof Van Schalkwyk the cabinets were re-built by die UFS Electronics and Mechanisation Division.  Some of the mechanisms were also replaced and computerised.   

“The re-building and mechanisation of the cabinets were funded by the faculty and because the work was done by our own staff, an amount of about R1 million was saved.  The maintenance costs will now be lower as the cabinets are specifically tailor made for our research needs,” said Prof Van Schalkwyk.

Where all monitoring was done manually in the past, the cabinets can now be controlled with a computer.  This programme was designed by Prof Koos Terblans from the UFS Department of Physics. 

According to Prof Van Schalkwyk the modernisation of the cabinets is part of the faculty’s larger strategy to get its instruments and apparatus up to world standards.  “With this project we have proved that we can find a solution for a problem ourselves and that there are ways to get old apparatus functional again,” said Prof Van Schalkwyk.

Media release
Issued by: Lacea Loader
Media Representative
Tel:   (051) 401-2584
Cell:  083 645 2454
E-mail:  loaderl.stg@mail.uovs.ac.za
26 July 2006

We use cookies to make interactions with our websites and services easy and meaningful. To better understand how they are used, read more about the UFS cookie policy. By continuing to use this site you are giving us your consent to do this.

Accept