Latest News Archive

Please select Category, Year, and then Month to display items
Previous Archive
02 January 2024 | Story Gerda-Marié van Rooyen | Photo Chris Nelson
Dr Maryam Amra Jordaan
Dr Maryam Amra Jordaan, co-founded SA Rebuilders.

Only 16% of plastic gets recycled in South Africa, despite technological advancements. While the Extended Producer Responsibility (EPR) Regulation of 2021 assigns post-consumer recycling responsibility to producers, substantial efforts are needed to develop effective waste management strategies, heighten public awareness, discover practical solutions, and hold plastic-producing companies accountable.

Prioritising environmental sustainability

Dr Maryam Amra Jordaan co-founded SA Rebuilders with her husband, Yasar Amra, in 2016. By combining 3D printing, chemistry, and plastic recycling, they tackle socio-economic issues while prioritising environmental sustainability. As the daughter of a miner from Kimberley, Dr Jordaan is committed to mitigating the negative effects that industries have on the health, environment, and social aspects of local communities. She was honoured with an Alumni Cum Laude Award from the University of the Free State (UFS) for her work in this regard.

Dr Jordaan’s academic journey at the UFS from 2001 to 2013 includes a BSc in Chemistry and Physiology, BSc Honours, MSc, and a PhD in Organic Chemistry. She dedicated five years to lecturing and research on the Qwaqwa Campus and four years at the Mangosuthu University of Technology (MUT). During this time, she authored 19 pharmaceutical and environmental chemistry research papers and won numerous national and international awards. She entered the UFS with dreams of assisting in some way and ended up helping to solve the Sustainable Development Goals (SDGs).

“Remarkable potential for rapid prototyping and supply chain resilience through digitisation exists, but the current energy crisis hampers the full realisation of 3D printing’s potential,” Dr Jordaan explains. Added to this, is the complex endeavour of becoming a 3D engineer. “Expertise in materials science and project management is equally essential. Creativity, quick learning, and meticulous attention to detail are all characteristics necessary to excel as a 3D engineer.”

Seeking out biodegradable product alternatives

Dr Jordaan stresses the need for effective waste management, awareness, practical solutions, and accountability for individuals and plastic-producing companies. Therefore, she promotes reusable and recyclable shopping bags, among others, and instils this behaviour in her children. The Amras actively seek out biodegradable product alternatives, as they are fully aware of the environmental impact of the manufacturing industry.

They incorporated this ideology in the manufacturing process of organic butter by transforming the plastic waste from this process into a 3D filament. This product is currently undergoing SABS testing, after which it will be available to the local market.

News Archive

Four modernised controlled environment cabinets inaugurated
2006-07-27

Photographed in a controlled environment cabinet were at the back from the left:  Mr Adriaan Hugo (head of the UFS Electronics and Mechanisation Division), Prof Herman van Schalkwyk (Dean: Faculty of Natural and Agricultural Sciences at the UFS) and Prof Koos Terblans (lecturer at the UFS Department of Physics).  In front is Mr Koos Uys (engineering consultant from Experto Designa who helped with the cooling systems of the cabinets).
Photo: Leonie Bolleurs

Different look for research in controlled circumstances at the UFS  

Research in controlled circumstances at the University of the Free State (UFS) turned a new page today with the inauguration of four modernised controlled environment cabinets of the Department of Soil, Crop and Climate Sciences.

“The controlled environment cabinets, which are situated next to the glass houses on the eastern side of the Agriculture Building on the Main Campus in Bloemfontein, were installed in the early 1980’s.  The cabinets, used for research purposes in controlled circumstances by the UFS for many years, became dysfunctional and needed to be repaired and put into use again,” said Prof Herman van Schalkwyk, Dean: Faculty of Natural and Agricultural Sciences at the UFS.

“The cabinets are used by the agronomics, horticulture and soil science divisions of the Department of Soil, Crop and Climate Sciences to control factors such as the temperature, the intensity and quality of light, synthesis and humidity.  This is done 24 hours a day, with hourly intervals,” said Prof Van Schalkwyk.

The cabinets are ideally suited to determine the joint and separate effects of these factors on the growth of plants.  The adaptability of plants to climate can also be investigated under controlled circumstances.  All of this leads to a better understanding of the growth and development process of plants, more specifically that of agricultural crops. 

“The effect of these environmental factors on the effectiveness of insect killers such as fungus killers, insecticide and weed killers can also be investigated and can help to explain the damage that is sometimes experienced, or even prevent the damage if the research is timeously,” said Prof Van Schalkwyk.

A new cabinet can cost between R2-3 million, depending on the degree of sophistication.  “Although controlled environment cabinets have been used for agricultural research for a long time, it has become costly to maintain them     and even more impossible to purchase new ones,” said Prof Van Schalkwyk.

According to Prof Van Schalkwyk the cabinets were re-built by die UFS Electronics and Mechanisation Division.  Some of the mechanisms were also replaced and computerised.   

“The re-building and mechanisation of the cabinets were funded by the faculty and because the work was done by our own staff, an amount of about R1 million was saved.  The maintenance costs will now be lower as the cabinets are specifically tailor made for our research needs,” said Prof Van Schalkwyk.

Where all monitoring was done manually in the past, the cabinets can now be controlled with a computer.  This programme was designed by Prof Koos Terblans from the UFS Department of Physics. 

According to Prof Van Schalkwyk the modernisation of the cabinets is part of the faculty’s larger strategy to get its instruments and apparatus up to world standards.  “With this project we have proved that we can find a solution for a problem ourselves and that there are ways to get old apparatus functional again,” said Prof Van Schalkwyk.

Media release
Issued by: Lacea Loader
Media Representative
Tel:   (051) 401-2584
Cell:  083 645 2454
E-mail:  loaderl.stg@mail.uovs.ac.za
26 July 2006

We use cookies to make interactions with our websites and services easy and meaningful. To better understand how they are used, read more about the UFS cookie policy. By continuing to use this site you are giving us your consent to do this.

Accept