Latest News Archive

Please select Category, Year, and then Month to display items
Previous Archive
28 August 2025 | Story André Damons | Photo André Damons
Dr Bonita van der Westhuizen
Dr Bonita van der Westhuizen, Senior lecturer and Pathologist in the UFS Department of Medical Microbiology, identified the first case of S. oblongispora mucormycosis in sub-Saharan Africa and among HIV-positive patients.

Medical staff at the University of the Free State (UFS) and the National Health Laboratory Service (NHLS) at the Universitas Academic Hospital have identified the first case of S. oblongispora mucormycosis in sub-Saharan Africa and among HIV-positive patients.

This discovery was made when a 32-year-old male patient was admitted to the Universitas Academic Hospital with right-sided facial swelling. The patient was HIV-positive, with a CD4 count of 50 cells/µl, and on antiretroviral therapy (ART), together with trimethoprim–sulfamethoxazole (TMX) prophylaxis. Additionally, he had hypertension for which he was also receiving treatment. The patient’s facial swelling rapidly progressed, with extension of redness and swelling observed daily.

Four days after admission, he underwent computerised tomography (CT) scan, and tissue biopsies were collected. The patient died three days later.

 

A significant discovery

Dr Bonita van der Westhuizen, Senior lecturer and Pathologist in the UFS Department of Medical Microbiology, who identified this rare fungus said this discovery is significant because it highlights the presence of this fungal pathogen in a region where it may have been previously unrecognised or underreported. It now raises awareness about the diversity of fungal infections affecting immunocompromised populations and underscores the need for improved diagnostics, surveillance, and treatment strategies in the region.

Dr Van der Westhuizen says though it is unclear where the deceased might have picked up this infection, moulds are ubiquitous in the environment. Patients usually get infected by inhalation of spores or traumatic implantation.

Together with colleagues Drs Liska Budding and Christie Esterhuysen, both from the UFS Department of Anatomical Pathology and the NHLS, and Prof Samantha Potgieter, Infectious disease expert in the UFS Department of Internal Medicine, Dr Van der Westhuizen published the case earlier this month (August) in the Journal Case Reports in Pathology.

 

Progresses rapidly

“Mucormycosis, which is caused by fungi in the order Mucorales, progresses rapidly due to a combination of factors related to the fungus, the host, and external influences. Mucorales fungi are known for their fast growth and ability to invade blood vessels. This allows the infection to spread quickly through the body, potentially reaching vital organs,” she says.

These fungi, Dr Van der Westhuizen explains, can resist being killed by immune cells, allowing them to establish infection. Some Mucorales fungi can produce toxins that disrupt blood vessels, further aiding the spread of the infection. Additionally, certain host conditions weaken the body's defences, allowing the infection to spread quickly.

“External factors that may play a role are traumatic injuries, endothelial damage and rarely hospital acquired infections. In essence, the aggressive nature of Mucorales fungi combined with weakened host defences and external factors creates a perfect storm for rapid disease progression in susceptible individuals.

“The Mucorales as a group normally infects patients with underlying risk factors including factors including diabetes mellitus, malignancies, transplant recipients, and current or past COVID-19 infection, however, this organism in particular, usually infects immunocompetent patients after traumatic inoculation,” says Dr Van der Westhuizen.

It is important to note, she continues, that all available data comes from research done in tropical regions. There is no data on this organism in sub-Saharan Africa which means it is still unknown what role this pathogen plays in our local patient population. The diagnostic complexities and rapid disease progression may contribute to the paucity of data in developing countries.

This infection can be treated with available antifungal agents, as well as surgical debridement of infected tissue. The challenge, however, is the rapid disease onset and progression to death. There is only a tiny window to help the patient. That is why clinical suspicion is so important, as immediate aggressive surgical debridement with antifungal agents is the only way to improve patient outcome. Unfortunately, this infection still has a high mortality rate, despite therapy.

 

Fungal diagnostics is complex

An invasive fungal infection (IFI) was not suspected in this patient, and he received neither antifungal therapy nor surgical interventions. His cause of death, likely the IFI, was only identified after he passed away and because of a combination of different testing platforms was used to identify this infection. Says Dr Van der Westhuizen: “This is unfortunately the case with mould infections as most readily available diagnostic methods lack sensitivity and these pathogens take long to grow in the laboratory. Fungal diagnostics is a specialised field that requires expertise. However, if clinicians are aware of these infections and they have an increased index of suspicion, appropriate therapy can be initiated even before the results are available.

“If clinicians suspect this type of infection early and they involve the infectious diseases physicians, microbiology and histopathology for support and advice, they will be guided to collect the most appropriate samples to ensure that an accurate diagnosis is made.”

There is a possibility that these infections had been missed before and even still today. Fungal diagnostics is a very complex field for various reasons. There is no highly sensitive stand-alone test to make a rapid diagnosis available. As newer methods are being developed and molecular diagnostics are advancing, fungal diagnostics are improving. A combination of testing platforms is still required to improve the sensitivity of diagnosing these infections.

Her hope for this research, says Dr Van der Westhuizen, who will now also embark further research into local fungal species for her PhD, their epidemiology, diagnostics, and their impact on vulnerable populations, ultimately contributing to better clinical care and health outcomes, is to advance understanding and awareness of Invasive mould infections specifically S. oblongispora, in sub-Saharan Africa and among HIV patients. She aims to improve early diagnosis, treatment strategies, and clinical outcomes, as well as to highlight the importance of monitoring fungal infections in immunocompromised populations. Additionally, her goal includes encouraging further research and collaboration in this area to better address fungal infections in the region.

News Archive

Research helps farmers save with irrigation
2017-02-15

Description: Irrigation research Tags: Irrigation research

Marcill Venter, lecturer in the Department of
Agricultural Economics at the University of the
Free State, has developed the mathematical
programming system, Soil Water Irrigation
Planning and Energy Management in order to
determine irrigation pump hours.
Photo: Rulanzen Martin

Her advice to farmers is that they should make sure they are aware of the total cost (investment and operating costs) of an irrigation system. In most cases the investment cost is low, but the operating cost over the lifetime of the system is high.

“It is very important to have a look at the total cost and to install the most economic system,” says Marcill Venter, lecturer at the University of the Free State (UFS), who has done research on the economic sustainability of water-pipe systems.

Irrigation systems important components for farming
This research comes at a time when many farmers are relying on their irrigation systems due to persistent drought and low rainfall during 2016. South Africa has also experienced an abnormal increase in electricity tariffs in recent years. Due to tariff increases which threaten the future profitability of irrigation producers, the Water Research Commission (WRC) has launched and financed a project on the sustainable management of irrigation farming systems. “I had the opportunity to work on the project as a researcher,” says Venter.

The heart of every irrigation system is the water pipes that bring life to crops and livestock, and this is what Venter’s research is about. “Water pipes are part of the whole design of irrigation systems. The design of the system impact certain factors which determine the investment and operating costs,” she says.

Mathematical system to help farmers
Venter and Professor Bennie Grové, also from the Department of Agricultural Economics at the UFS, designed the Soil Water Irrigation Planning and Energy Management (SWIP-E) programming model as part of the WRC’s project, as well as for her master’s degree. “The model determines irrigation pump hours through a daily groundwater budget, while also taking into account the time-of-use electricity tariff structure and change in kilowatt requirements arising from the main-line design,” says Venter. The model is a non-linear programming model programmed in General Algebraic Modeling System (GAMS).

Design of irrigation system important for sustainability

The main outcome of the study is that the time-of-use electricity tariff structure (Ruraflex) is always more profitable than the flat-rate structure (Landrate). The interaction between the management and design of a system is crucial, as it determines the investment and operating costs. Irrigation designers should take the investment and operating cost of a system into account during the design process. The standards set by the South African Irrigation Institute (SAII) should also be controlled and revised.

Water-pipe thickness plays major role in cost cuts
There is interaction between water-pipe thickness, investment and operating costs. When thinner water pipes are installed, it increases the friction in the system as well as the kilowatt usage. A high kilowatt increases the operating cost, but the use of thinner water pipes lowers the investment cost. Thicker water pipes therefore lower the friction and the kilowatt requirements, which leads to lower operating costs, but thicker pipes have a higher investment cost. “It is thus crucial to look at the total cost (operating and investment cost) when investing in a new system. Farmers should invest in the system with the lowest total cost,” says Venter.

We use cookies to make interactions with our websites and services easy and meaningful. To better understand how they are used, read more about the UFS cookie policy. By continuing to use this site you are giving us your consent to do this.

Accept